Choose your brand, then your model, from the picker on this page. Your selection is attached to the order, so it appears on your confirmation email and on the packing slip. If you're not sure of your exact model, check Settings → About phone.

Yes. Every skin is precision-cut for one specific model, so it lines up with the cameras and edges without any trimming. The adhesive stays repositionable for the first few minutes — if it goes on crooked, lift it and realign. An application guide is included in every order. Most people finish in under five minutes.

No. Cutouts are mapped per model, so the cameras, flash, mic, speakers, charging port and buttons all stay clear. Wireless charging and MagSafe work through the skin — at this thickness there isn't enough material to interfere.

No. A skin is roughly 0.2 mm of vinyl — a fraction of the thickness of any case, with nothing to trap heat against the body. Your phone will still warm up during gaming, fast charging or long camera use, but that's the chipset working, and it happens with or without a skin.

Yes. The adhesive is low-tack and lifts cleanly off glass, metal and painted backs without leaving residue. If it's been on for several months, warm the edge with a hairdryer on low, then peel slowly at a shallow angle. Skins are single-use — once removed, a skin won't stick properly a second time.

We don't recommend it. Adhesive can't bond evenly across a fractured surface, so the skin lifts along the crack lines within days. A skin also won't hold loose glass together — it's a finish, not a repair. Get the back panel replaced first, then skin it. A single hairline crack with no loose pieces may hold, but we can't guarantee it and it isn't covered by replacement.